Awarepoint S2 Installation Manual
        | |
3Awarepoint Sensor S2 © 2008 Awarepoint CorporationInstallation Manual1 IntroductionCustomer support: 1‐888‐TAGIT‐NOW1.1 OverviewThis system installation manual is for an Awarepoint employee or Awarepoint trainedservice provider who intends to install the Awarepoint Sensor.1.2 Preparing for Installation – Read this First!1.2.1 Tools and SuppliesPrior to installation, you will need the following tools and supplies:1. Small Ethernet switches (if necessary to plug in your laptop)2. Hospital Grade Power Strips (if necessary to put an Awarepoint Sensor in an outletthat is full)3. Installation Kit, consisting of the following: Serial Cable with Null Modem Adapter and F‐F Gender Changer Ethernet Cable Zip‐Ties Double‐Sided Tape Mounting Strips4. Installation Tools, consisting of the following: Laptop Terminal emulator software (we recommend TeraTerm, available fromhttp://www.tucows.com/preview/195282 ) USB to Serial adapter (if laptop does not have a serial port) Wire cutters – for trimming Zipties Insulated blade screwdriver – for electrical faceplates, if you make an errorwhen taping the Awarepoint Sensors down Phillips screwdriver – for installing the Awarepoint Appliance1.2.2 InformationPrior to installation, you will need the following information:1. Maps for all floors, in paper and electronic format with coverage area outlined2. Awarepoint Bridge IP Addressing: DHCP or Static. If using Static addressing then: IP Address, DefaultGateway, and Subnet Mask. IP Address of Awarepoint Appliance |
manualsdatabase
Your AI-powered manual search engine