Axis 150 Quick Installation Manual

Contents

Axis 150 Quick Installation Manual Manual pdf 2 page image

Quick Installation GuideThis guide covers the installation and basic setup procedures for theAXIS 150/152. If you need more detailed instructions, please refer tothe AXIS 150/152 User’s Manual.Physical DescriptionInstalling the AXIS 150/152You should proceed with the following instructions, as appropriatefor your type of network. Refer to all relevant sections if you intendto use the AXIS 150/152 in a multiprotocol environment.Hardware Installation1. Note the serial number found on the underside label of the AXIS150/152. You need this number during the configuration.2. Switch off the printer. Remove the AXIS 150/152 power supply.3. AXIS 150 only: Connect your AXIS 150 to the network using ashielded twisted pair (10baseT) cable.4. AXIS 152 only: Connect your AXIS 152 to the network using ashielded thin wire (10base2) cable.5. Switch on the printer. Connect the AXIS 150/152 power supply.6. Ensure that the Network Indicator is flashing. To check theconnections, print a Test Page by depressing the Test Button.LPT1 PrinterConnectorLPT2 PrinterConnectorExternal PowerSupply ConnectorEthernetConnectorTest ButtonNetwork IndicatorPower IndicatorAXIS 150 Network Print ServerLPT1 PrinterConnectorLPT2 PrinterConnectorExternal PowerSupply ConnectorTest ButtonNetwork IndicatorPower IndicatorEthernetConnectorAXIS 152 Network Print Server