Axis 200 User Manual

Also see for NETEYE 200: Technical specifications User manual

Axis 200 User Manual Manual pdf 19 page image

Using the Camera Server AXIS 200+ and 240 User’s Guide18CamImg Java AppletCamImg is a Java applet supplied with your Axis Camera Server. It automatically updates images(default=fullsize.jpg) and can be started from anywhere on the network. The image refresh rate isprogrammable.Should you choose to use the CamImg applet on a remote server, it is necessary to copy theCamImg.class file and all other associated files from your Axis Camera Server to the target serverwhere your images are to be kept.Simply insert the following piece of code in your HTML file where you want the images to appear.Note: The CamImg parameters defined above are optional. Please refer to the User Manual for a fulldescription of the available parameter options.CamCtrl Java AppletCamImg is a Java applet supplied with your Axis Camera Server. It is an easy-to-use Java appletthat continuously loads live from Axis Camera Servers and enables Pan/Tilt control of connectedcameras via the AXIS 240. Please refer to the User’s Manual for a full description of the availableparameters.Simply insert the following piece of code in your HTML file where you want the images to appearNote: A number of optional parameters can be included into your CamCtrl applet. Please refer to theUser’s Manual for a full description of the available parameter options.Pan/Tilt ControlClicking the Pan Tilt link from the AXIS 240 Home page activates a Pan/Tilt facility that allowsconnected cameras to be controlled using a simple graphical Web interface. The Pan/Tilt Controlfunction is only supported in the AXIS 240.For further information on this facility, please refer to the Pan/Tilt/Zoom support pages athttp://www.axis.com/products/camera_servers/CODE="CamImg.class" WIDTH=362 HEIGHT=328> VALUE = "/img/image1.jpg | /img/image2.jpg"> image"> VALUE = "5">

If you were using a Java-enabled browser, you would see acontinuously updating image instead of this paragraph.

CODE="CamCtrl.class" WIDTH=512 HEIGHT=478>