Axis 207 Installation Manual

Also see for AXIS 207: User manual Specifications Product guide Specification User manual

Contents

Axis 207 Installation Manual Manual pdf 7 page image

AXIS 207/207W/207MW Installation Guide Page 7ENGLISHENGLISH3. Install the hardware3a. Mount the cameraMake a note of the serial number (S/N) located on the product label. This number may berequired during installation.Wall mounting1. If required, use the 3 supplied screws to fix the baseplate to a flat (horizontal or vertical) surface.2. To use a shorter stand, unscrew the lock ring to releasethe camera, and remove the extension section.3. Attach the camera, adjust the angle and tighten thelock ring.Shelf mounting1. Position the clamp and tighten the fixing screwsecurely.2. Attach the clamp to the lock ring on the camera.3. Adjust the angle and tighten the lock ring.3b. Connect the cables1. Using the self-adhesive strip, attach the supplied cableclip to the rear panel and fasten the power cable to it. This will prevent accidental cabledisconnection.2. Connect the camera to the network using a shielded network cable. For the wirelessmodels, this connection is temporary and allows the camera’s settings to be configuredvia the wired network before connecting to the wireless network.3. Optionally connect external devices, e.g. alarm devices. See page 5 for information onthe terminal connector pins.4. Connect power, using one of the methods listed below:• Connect the supplied indoor power supply to the power connector on the camera.• Connect power via the terminal connector. See page 5 for information on the ter-minal connector pins.5. Check that the indicator LED:s indicate the correct conditions. See the table on page 6for further details. Note that some LED:s can be disabled and may be unlit.! IMPORTANT! - The AXIS 207/207W/207MW is designed for indoor use only,and must always be positioned where it is not exposed to direct sunlight orstrong halogen light, which can cause permanent damage to the camera’simage sensor. Damage as a result of exposure to strong light is not covered bythe Axis warranty.