Axis 210/211 User Manual
                                                      | |
Contents
|
7AXIS 210/211 - Product FeaturesOverviewPower Connector - For connection of the PS-K power adapter (included).I/O Connector - The I/O terminal connector provides the physical interface to onetransistor output, one digital input and an auxiliary connection point for DC power. Formore information, see The I/O Terminal Connector, on page 42.Network Connector - The camera connects to the network via a standard networkconnector. Supporting NWAY, the camera detects the speed of the local network segment(10BaseT/100BaseTX Ethernet). This socket can also be used to power the AXIS 211 viaPoE (Power over Ethernet).Serial Number - This number is used during installation.Control Button - Press this button to install using the AXIS Internet Dynamic DNS Service(see page 11) or to restore the factory default settings, as described in Resetting to theFactory Default Settings, on page 41.Power connectorDC-Iris control cable(AXIS 211)Rear panelAXIS 211connectorI/O terminalNetwork connector(and PoE for AXIS 211)Status AXIS 210UndersideindicatorAXIS 211DC-IrisFocus pullerStatusindicatorTele/wide pullerControlcablePower indicatorNetwork indicatorControl buttonSerial numberMounting screwhole |
Related manuals for Axis 210/211
manualsdatabase
Your AI-powered manual search engine