Axis 210 Quick Installation Manual

Also see for Axis 210: User manual Specifications Product guide Installation guide Installation guide

Contents

Page 4 AXIS 210/211 Quick Installation GuideMounting1. If required, use the 3 supplied screws tofix the base plate to a flat surface.2. To use the shorter stand, remove theextension section.3. Attach the camera to the top of the stand.4. Adjust the camera angle and gentlytighten the lock ring.Important!Cable Connections1. Connect the AXIS 210/211 to your network using a standard RJ-45 network cable. If usingPower over Ethernet (PoE) with the AXIS 211, this is the only connection required - step 2can be omitted. For more information on PoE, please see the User’s Manual.2. Connect the power adapter to the camera.Installation MethodsThe AXIS 210/211 is designed for installation on an Ethernet network. This involves assigningit an IP address, automatically (via e.g. DHCP) or manually. Several installation methods areavailable. The one to use depends on how your network is configured. If unsure of the methodto use, please consult your network administrator, or see the documentation for your network.• If your network has an Internet connection (with no HTTP proxy) and uses a DHCP server toassign IP addresses, use the One-Click installation procedure. See page 5.• If your network uses dynamic IP addressing and your computer is running the UPnP TM service,the AXIS 210/211 will automatically be detected and displayed on your screen. See page 6.• If the above methods cannot be used, you will need to assign an IP address manually, usingeither the AXIS IP Utility, (see page 6) or the ARP/Ping method, as described on page 7.• If you are using e.g. a home broadband router, you may find it convenient to view the router’sadministration pages to discover which IP address has been assigned to your AXIS 210/211.Please consult the router’s documentation for further information.The AXIS 210 is designed for indoor use only, and must always be positioned where it is not exposed todirect sunlight or strong halogen light, which can cause permanent damage to the camera’s image sensor.Damage as a result of exposure to strong light is not covered by the Axis warranty.To use the AXIS 211 outdoors it must be installed in an approved outdoor enclosure. For more informationon outdoor enclosures, please visit www.axis.comExtensionsectionLock ringLock ring