Axis 210 User Manual

Also see for Axis 210: User manual Specifications Product guide Installation guide Installation guide

31AXIS 210/211/211A - Event ConfigurationConfiguring EventTypesAn Event Type describeshow and when the camerawill perform certain actions.Example: If somebody passes infront of the camera, and an event thatuses motion detection has been con-figured to act on this, the camera cane.g. record and save images to an FTP server, and/or send a notification email to a pre-configured email addresswith a pre-configured message. Images can be sent as email attachments.Triggered EventA Triggered event can be activated by e.g:• a switch (e.g. a doorbell) connected to the camera’s input port• detected movement in a configured motion detection window• a manually activated action, e.g. from an action button in the web interface• on restart (reboot) after e.g. power lossHow to set up a triggered eventThis example describes how to set the camera to upload images when e.g the main door isopened:1. Click Add triggered on the Event types page.2. Enter a descriptive name for the event, e.g. Main door open.3. Set the priority - High, Normal or Low (see the online help).4. Set the Respond to Trigger... parameters for when the event will be active,e.g. only after office hours.5. Select the trigger alternative from the Triggered by... drop-down list, e.g. selectInput ports, for the sensor connected to the door.6. Set the When Triggered... parameters, i.e. define what the camera will do if themain door is opened e.g., upload images to an FTP server.7. Click OK to save the Event in the Event Types list.Please see the online help for descriptions of each available option.Note: Up to 10 event types can be configured in the camera, and up to 3 of these can be configured to uploadimages.