Axis 211M Installation Manual
Also see for 211M: SpecificationsProduct guideDatasheetBrochure & specsDatasheet
                                                                | |
Contents
| 
AXIS 211M Installation Guide Page 5ENGLISHENGLISHInstall the hardwareConnect the cables1. Connect the camera to the network using a shielded network cable.2. Optionally connect external input/output devices, e.g. alarm devices. See page 12 forinformation on the terminal connector pins.3. Connect power, using one of the methods listed below:• The supplied power connector.• PoE (Power over Ethernet). If available, this is automatically detected when thenetwork cable is connected (see above).• Connect power via the terminal connector. See page 12 for information on theterminal connector pins.4. Check that the indicator LEDs indicate the correct conditions. See the table on page 13for further details. Note that some LEDs can be disabled and may be unlit.!IMPORTANT! - The AXIS 211M is designed for indoor and outdoor use. To usethe camera outdoors, it must be installed in an approved outdoor housing.Please see www.axis.com for more information on outdoor housings. |
Related manuals for Axis 211M
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine