Axis 212 PTZ Installation Manual

Also see for AXIS 212 PTZ: Specifications Product guide Datasheet Installation guide Product review guide

Contents

Page 12 AXIS 212 PTZ Installation GuideSetting the IP address with ARP/Ping1. Acquire an IP address on the same network segment your computer is connected to.2. Locate the serial number (S/N) on the AXIS 212 PTZ product label.3. Open a Command Prompt on your computer and enter the following commands(as appropriate for your operating system):4. Check that the network cable is connected to the camera. Start/restart the camera bydisconnecting and reconnecting power.5. Close the Command prompt when you see ‘Reply from 192.168.0.125: ...’ or similar.6. Start your browser, type in http:// in the Location/Address field and pressEnter on your keyboard.7. See page 13 for instructions on how to set the password.Notes: • The ARP/Ping command must be issued within 2 minutes of connecting power to the camera.• To open a command prompt in Windows: from the Start menu, select Run... and type cmd (or command inWindows 98/ME). Click OK.• To use the ARP command on a Mac OS X, use the Terminal utility, which is found under Application > Utilities.Windows syntax:arp -s Address> Number>ping -l 408 -t Address>Windows example:arp -s 192.168.0.125 00-40-8c-18-10-00ping -l 408 -t 192.168.0.125UNIX/Linux/Mac syntax:arp -s Address> Number> tempping -s 408 Address>UNIX/Linux/Mac example:arp -s 192.168.0.125 00:40:8c:18:10:00 tempping -s 408 192.168.0.125