Axis 212 PTZ User Manual

Also see for AXIS 212 PTZ: Specifications Product guide Datasheet Installation guide Product review guide

AXIS 212 PTZ - Technical Specifications47General performance considerationsWhen setting up your system, it is important to consider how various settings and situations will affectperformance. Some factors affect the amount of bandwidth (the bit rate) required, others can affect the framerate, and some will affect both. If the load on the CPU reaches its maximum, this will also affect the frame rate.The following factors are among the most important to consider:• High image resolutions and/or lower compression levels result in larger images. Bandwidth affected.• Access by large numbers of Motion JPEG and/or unicast MPEG-4 clients. Bandwidth affected.• Simultaneous viewing of different streams (resolution, compression, etc.) by different clients. Framerate and bandwidth affected.• Accessing both Motion JPEG and MPEG-4 video streams simultaneously. Frame rate and bandwidthaffected.• Heavy usage of event settings affects the camera’s CPU load. Frame rate affected.• Enabled motion detection. Frame rate and bandwidth affected.• Heavy network utilization due to poor infrastructure. Bandwidth affected• Viewing on poorly performing client PC’s lowers perceived performance. Frame rate affected.Optimizing your systemTo see the bandwidth and frame rate currently required by the video stream, the AXIS 212 PTZ provides a toolthat can be used to display these values directly in the video image.To do this, special format strings are added as part of a text overlay.Simply add #r (average frame rate in fps) and/or #b (average bandwidthin kbps) to the overlay.For detailed instructions, please see the online help for Video & Image >Text Overlay Settings, and the help for File Naming & Date/TimeFormats.Important!•The figures displayed here are the values as delivered by the camera. If other restrictions are currently in force, (e.g. band-width limitation) these values might not correspond to those actually received by the client.•For Motion JPEG, these values will be accurate as long as no frame rate limit has been specified.