Axis 212 PTZ-V Installation Manual

Also see for AXIS 212 PTZ: Specifications Product guide Datasheet Product review guide Specifications

Contents

Axis 212 PTZ-V Installation Manual Manual pdf 14 page image

Page 14 AXIS 212 PTZ/ AXIS 212 PTZ-V Installation GuideAccessing the AXIS 212 PTZ/AXIS 212 PTZ-V from the InternetOnce installed, your AXIS 212 PTZ/AXIS 212 PTZ-V is accessible on your local network(LAN). To access the camera from the Internet, network routers must be configured to allowincoming traffic, which is usually done on a specific port. Please refer to the documentationfor your router for further instructions.For more information on this and other topics, please visit the Axis Support Web atwww.axis.com/techsupResetting to the Factory Default SettingsThis will reset all parameters, including the IP address, to the Factory Default settings:1. Disconnect power from the camera.2. Press and hold the Control button and reconnect power.3. Keep the control button pressed until the Status Indicator displays amber (this may takeup to 15 seconds).4. Release the control button.5. When the Status Indicator displays green (which can take up to 1 minute) the process iscomplete and the camera has been reset.6. Re-install AXIS 212 PTZ/AXIS 212 PTZ-V using one of the methods described in thisdocument.More informationIt is also possible to reset all parameters, except the IP parameters, to the original factorysettings via the web interface. For more information, please refer to the online help and theuser’s manual. The AXIS 212 PTZ/AXIS 212 PTZ-V User’s Manual is available from the AxisWeb site at www.axis.com or from the Axis Network Video Product CD.