Axis 212 PTZ-V User Manual

Also see for AXIS 212 PTZ: Specifications Product guide Datasheet Installation guide Product review guide

39AXIS 212 PTZ/-V - System OptionsAdvancedScripting - This is a powerful and advanced function that enables the use of custom scripts.Caution!Improper use may cause unexpected behavior or even cause loss of contact with the unit. If a script does causeproblems, reset the unit to its factory default settings. A backup file may be of use to return the unit to its latestconfiguration. Axis strongly recommends that you do not use this function unless you fully understand theconsequences. Axis support does not provide assistance for problems with customized scripts.For more information, please visit the Developer pages at www.axis.com/developerPlain Config - This function is for the advanced user with experience of Axis network camera configuration. All parameterscan be set and modified from this page. Help is available from the standard help pages.Resetting to the Factory Default SettingsTo reset the camera to the original factory default settings, go to the System Options > Maintenance web page (as describedin Maintenance, on page 38) or use the Control button on the underside of the camera (see page 6) as described below:Using the Control ButtonTo reset the camera to the factory default settings using the Control Button:1. Disconnect the power adapter.2. Press and hold the Control button while reconnecting the power.3. Keep the Control button pressed until the Status Indicator color changes to amber (this may take up to 15 seconds).4. Release the Control button.5. When the Status Indicator changes to Green (which may take up to 1 minute), the process is complete and the camerahas been reset. The unit will now have the default IP address 192.168.0.90Note:Resetting to the factory default settings using the Control Button will cause all parameters (including the IP address)to be reset. Refer to Maintenance, on page 38 for other methods that do not reset the IP address.