Axis 213 PTZ User Manual

Also see for AXIS 213 PTZ: Specifications Product guide Brochure User manual User manual

Axis 213 PTZ User Manual Manual pdf 33 page image

33AXIS 213 PTZPorts & Devices - LED SettingsWhen the LED on the front of the AXIS 213 PTZ is Enabled, the LED is lit when the AXIS 213 PTZ is on andflash when there is any network activity. If Disabled, the LED is off, except when there is a hardwareproblem and the LED will flash red.Ports & Devices - MaintenanceMaintain Server• Restart - The unit is restarted without changing any of the settings. Use this method if the unit is notbehaving as expected.• Restore - The unit is restarted and most current settings are reset to factory default values. The settingsthat will not be reset are as follows:• the boot protocol (DHCP or static)• the static IP address• the default router• the subnet mask• the system time• Default - The Factory default button should be used with caution. Pressing this button will reset all ofthe AXIS 213 PTZ's settings to the factory default values (including the IP address)Upgrade ServerSee Upgrading the Firmware, on page 37.BackupClick the Backup button to take a backup of all of the parameters, and user-defined scripts. It will then bepossible to return to the previous settings if the settings are changed and there is unexpected behavior.Note: The root password will also be reset to the password saved in the backup file.RestoreClick the Browse button to locate the saved backup file (see above) and then click the Restore button. Thesettings will be restored to the previous configuration.Note: Backup and Restore can only be used on the same unit running the same firmware. This feature is not intended for multi-config-urations or for firmware upgrades.Support - Support OverviewThe support overview page provides valuable information on troubleshooting and contact information,should you require technical assistance.Support - System OverviewThis provides a quick look at the status and settings for the camera. Information that can be found hereincludes the camera’s firmware version, IP address, security, event and image settings, as well as recent logitems. Many of the captions are also links to the Setup pages, so that you can quickly and easily makeadjustments to the camera’s settings.Support - Logs & ReportsInformationThe Logs, Server report and the Parameter List provide valuable information for troubleshooting and whencontacting Axis’ support service. Please include a recent Server Report with your query when contactingAxis support.