AXIS 214 Installation Guide Page 5 ENGLISHSetting the IP addressThe AXIS 214 is designed for use on an Ethernet network and must be assigned an IP addressto make it accessible.AXIS IP UtilityAll installation methodsThis table shows all of the available methods for setting or discovering the IP address. Select amethod from the left-hand column and check the requirements for it to the right.Notes: ï UPnPô and DHCP are both enabled by default in the AXIS 214.ï The AXIS 214 has the default IP address 192.168.0.90ï To view the admin pages for the DHCP server, please see the serverís own documentation. You may need tocontact your network administrator.ï If setting the IP address fails, check that there is no firewall blocking the operation.ï Bonjour - applies only to browsers that support it, e.g. Safari. Bonjour is a trademark of Apple Computer, Inc.AXIS IP Utility is the recommended method for setting an IP address in Windows. This free appli-cation can be used on networks with or without a DHCP server. See page 6 for more information.DHCP Server innetworkInstall onsame networksegmentInternetconnection withno HTTP proxyOperatingsystemAXIS IP Utility(recommended method)See page 6Optional Required WindowsUPnPôSee page 6Optional Required Windows (MEor XP)BonjourSee page 6Optional Required Mac OSX(10.4 or later)AXIS Dynamic DNS ServiceSee page 8Recommended Required AllAXIS Camera ManagementSee page 8Optional Required WindowsView DHCP serveradmin pages for IP address(See note below)Required AllRequirementsmethodsInstallation