AXIS 215 PTZ Installation Guide Page 3ENGLISHENGLISHAXIS 215 PTZInstallation GuideThis installation guide provides instructions for installing the AXIS 215 PTZ NetworkCamera on your network. For all other aspects of using the product, please see the User’sManual, available on the CD included in this package, or from www.axis.com/techsupInstallation steps1. Check the package contents against the list below.2. Hardware overview. See page 4.3. Mount the hardware. See page 5.4. Assign an IP address. See page 10.5. Set the password. See page 13.Package contentsItem Models/variants/notesNetwork camera • AXIS 215 PTZ 50Hz (PAL)• AXIS 215 PTZ 60Hz (NTSC)Power adapter 12V DCPower adapter mainscable(country-specific)• Europe• UK• Australia• USA/Japan• Argentina• Korea4-pin block connector For connecting external devices to the I/O terminal connectorDrop ceiling mounting kit 1 inner bracket, 1 outer bracketPlastic domes x 2 1 x for surface mounting1 x for drop ceiling mountingScrewdriver Resitorx T20Screw kit • 1 x safety wire 1m (3.3 ft)• 2 x plug 30x3.4-4mm• 2 x screw ST4.2x38• 4 x screw M4x10• 1 x screw M4x4• 2 x screw M4x10 resitorxTemplate Use to mark positions for surface/drop ceiling mountingCD AXIS Network Video Product CD, including product documentation,installation tools and other softwarePrinted Materials AXIS 215 PTZ Installation Guide (this document)Axis Warranty DocumentImportant!This product must be used incompliance with local lawsand regulations.