Axis 216FD/FD-V User Manual
Also see for Axis 216FD: Installation guideSpecificationsProduct guideUser manualInstallation guide
                                                                | |
Contents
| 
23AXIS 216FD/FD-V - AudioDepending on the selected encoding, set the desired audio quality (Bit rate). The settingsdepend on the available bandwidth and the required audio quality.The AXIS 216FD/FD-V can be set to trigger an event if the incoming sound level risesabove, falls below or passes the set value. The Alarm level is set between 0-100%.Audio OutputIf the sound from the speaker is too low or high, adjust the output gain for the activespeaker attached to the AXIS 216FD/FD-V.When satisfied with the settings, click Save, or click Reset to revert to the previously savedsettings.Note: To receive synchronized video and audio, it is recommended that the time settings in the camera and clientPC are synchronized with an NTP Server. This is enabled in the camera under System Options > Date &Time. Please refer to the help pages for more information. |
Related manuals for Axis Axis 216FD
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine