Axis 216FD Installation Manual
Also see for Axis 216FD: Installation guideSpecificationsProduct guideUser manualUser manual
                                                                          | |
Contents
| 
Page 14 AXIS 216FD Installation GuideAdjusting the image1. Open the Live View page in the Web interface and make the following adjustments on thecamera:2. Loosen the locking screw and tilt adjustment screws.3. Turn the lens to the desired position.4. Once satisfied, gently tighten the locking screw and tilt adjustment screws to secure thecamera’s position.5. Turn the image balance ring to set the horizontal position.6. Open the Focus Adjustment page in the Web interface under Basic Configuration > Focusand follow the on-screen instructions. Use the image window to adjust the focus andzoom.• To set the focus and zoom, loosen the zoom and focus pullers counterclockwise androtate the rings.• Lock the focus and zoom pullers in position by rotating the screws clockwise.Note:The image can be fine-tuned for low lighting conditions. Go to 'Setup > Video & Image > Advanced' and refer tothe online help for more information.Image Focus pullerZoom pullerscrewTilt adjustmentscrewTilt adjustmentbalanceringLocking screw |
Related manuals for Axis Axis 216FD
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine