Axis 231D Installation Manual

Also see for 231D: Product instructions User manual Connection guide User manual User manual

Contents

Installing the AXIS 231D/232D 9 ENGLISHManual Installation using AXIS IP UtilityFollow these instructions to set the IP address manually using AXIS IP Utility:1. Acquire an unused IP address for yourAXIS 231D/232D. (AXIS IP Utilitydetects the subnet your computer isconnected in. The AXIS 231D/232D mustbe installed on the same subnet).2. Connect a standard RJ-45 network cableto your AXIS 231D/232D and connect itto the network.3. Connect the power to the AXIS231D/232D.4. Start AXIS IP Utility on your computer.5. Enter the serial number:6. Enter the IP address acquired for your AXIS 231D/232D and click Set IP.7. When prompted by AXIS IP Utility, restart the Network Dome Camera bydisconnecting and reconnecting the external power supply.8. A message confirming that the IP address has been set will be displayed, click OK.9. Click View Home Page to access the AXIS 231D/232D Web pages.10.Enter a new password for the root user (administrator).11. If required, accept the installation of AMC onto your workstation. See AXIS MediaControl (AMC), on page 8 for more information.12.The installation is now complete.If you need additional information, refer to the AXIS 231D/232D User’s Manual which isavailable from the Axis web site at http://www.axis.comAXIS IP Utility is a Windows software application that installs the AXIS 231D/232D to your localnetwork using a static IP address.• Download the AXIS IP Utility software to your computer, free of charge from the Supportpages at http://www.axis.com/techsup/software• Double-click the setup.exe file and follow the on-screen instructions to install the softwareon your computer.The serial number/MAC address (S/N) is located on the label on the AXIS 231D/232D