Page 4 AXIS 231D+/232D+ Installation GuideHard Ceiling MountReferring to the image above, follow these instructions to mount the dome camera:1. Using the supplied drill template, drill three holes in the ceiling and secure the bracket to the ceiling withthree screws.2. Slide the decoration ring and cover ring on to the AXIS 231D+/232D+.3. Insert the fixing screw holder into the mounting slot.4. Connect the connection module cable to the connection module.5. Connect the Ethernet cable and connection module to the AXIS231D+/232D+.6. Connect the power cable (24V AC) to the connection module andcheck that the power and network LEDs light up green.7. Mount the dome body onto the bracket and rotate it clockwise.Make sure the screw hole on the side of dome is aligned with thebracket. Tighten the fixing screw to secure the dome.8. Attach and secure the cover ring and decoration ring to thebracket.9. The hardware installation is now complete, proceed to Assign an IPaddress, on page 7 to install the AXIS 231D+/232D+ on yournetwork.moduleNetworkConnectionconnectorNetworkIndicatorPowerIndicatorfixing screwMounting slot forControlbuttonconnectorSerial numberS/NSide viewDecorationringCeilingbracketCover ringRear view24V ACPS GNDConnection module cable connectorConnection module