|
AXIS COMMUNICATIONS Quick User’s Guide2 About This DocumentThis document is intended as an addendum to the videoserver User’s Manual. It includes instructions for installingthe Axis Rack Mounted Video Server Solution on yournetwork. Later versions of this document will be posted tothe Axis Web site, as required.Intellectual Property Rights - Axis AB hasintellectual property rights relating to technology embodiedin the product described in this document. In particular,and without limitation, these intellectual property rightsmay include one or more of the patents listed athttp://www.axis.com/patent.htm and one or moreadditional patents or pending patent applications in the USand other countries.Legal Considerations - Camera surveillance can beprohibited by laws that vary from country to country.Check the laws in your local region before using thisproduct for surveillance purposes.Electromagnetic Compatibility (EMC) - Thisequipment generates, uses, and can radiate radio frequencyenergy, and if not installed and used in accordance with theinstruction manual, may cause interference to radiocommunications. Shielded cables should be used to ensurecompliance with EMC standards.US - This equipment has been tested and found to complywith the limits for a Class B digital device, pursuant to Part15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in aresidential installation. This equipment generates, uses andcan radiate radio frequency energy and, if not installed andused in accordance with the instructions, may causeharmful interference to radio communications. However,there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmfulinterference to radio or television reception, which can bedetermined by turning the equipment off and on, the user isencouraged to try to correct the interference by one ormore of the following measures: Reorient or relocate thereceiving antenna. Increase the separation between theequipment and receiver. Connect the equipment into anoutlet on a circuit different from that to which the receiveris connected. Consult the dealer or an experienced radio/TVtechnician for help.Europe - This digital equipment fulfills therequirements for radiated emission according to limit B ofEN55022, and the requirements for immunity according toEN55024 residential, commercial, and light industry.Japan - This is a class B product based on the standard ofthe Voluntary Control Council for Interference fromInformation Technology Equipment (VCCI). If this is usednear a radio or television receiver in a domesticenvironment, it may cause radio interference. Install anduse the equipment according to the instruction manualAustralia - This electronic device meets the requirements ofthe Radio communications (Electromagnetic Compatibility)Standard 1998 AS/NZS 3548. Compliance is not valid forunshielded network cables.Liability - Every care has been taken in the preparation ofthis manual; Please inform your local Axis office of anyinaccuracies or omissions. Axis Communications AB cannot beheld responsible for any technical or typographical errors andreserves the right to make changes to the product and manualswithout prior notice. Axis Communications AB makes nowarranty of any kind with regard to the material containedwithin this document, including, but not limited to, the impliedwarranties of merchantability and fitness for a particularpurpose. Axis Communications AB shall not be liable norresponsible for incidental or consequential damages inconnection with the furnishing, performance or use of thismaterial.Trademark Acknowledgments - Acrobat, Adobe, Boa,Ethernet, IBM, Internet Explorer, Linux, Macintosh, Microsoft,Netscape Navigator, UNIX, Windows, WWW are registeredtrademarks of the respective holders. Java and all Java-basedtrademarks and logos are trademarks or registered trademarksof Sun Microsystems, Inc. in the United States and othercountries. Axis Communications AB is independent of SunMicrosystems Inc.Support Services - Should you require any technicalassistance, please contact your Axis reseller. If your questionscannot be answered immediately, your reseller will forwardyour queries through the appropriate channels to ensure a rapidresponse. If you are connected to the Internet, you can:• download user documentation and firmware updates• find answers to resolved problems in the FAQ database.Search by product, category, or phrases• report problems to Axis support staff by logging in to yourprivate support areaVisit the Axis Support Web at www.axis.com/techsupBattery Replacement - The Axis Rack Mounted VideoServer Solution uses a 3.0V CR2032 Lithium battery as thepower supply for its internal real-time clock (RTC). This batterywill, under normal conditions, last for a minimum of 5 years.Low battery power affects the operation of the RTC, causing itto reset at every power-up. A log message will appear whenbattery replacement is required.. The battery should not bereplaced unless required! If the battery needs replacing, pleaseobserve the following points:• Caution! Danger of explosion if battery is incorrectly replaced• Replace only with the same or equivalent battery, asrecommended by the manufacturer• Dispose of used batteries according to the manufacturer'sinstructions
|
