Axis 27505R1 Installation Manual

Also see for Axis 216FD: Installation guide Specifications Product guide User manual User manual

Contents

Axis 27505R1 Installation Manual Manual pdf 14 page image

Page 14 AXIS 216FD Installation GuideResetting to the Factory Default SettingsThis will reset all parameters, including the IP address, to the Factory Default settings:1. Disconnect power from the camera.2. Press and hold the Control button and reconnect power.3. Keep the Control button pressed until the Power indicator flashes amber (this may takeup to 15 seconds).4. Release the Control button. When the Power indicator displays green (which can take upto 1 minute) the process is complete and the camera has been reset.5. Re-install the AXIS 216FD using one of the methods described in this document.It is also possible to reset parameters to the original factory default settings via the webinterface. For more information, please see the online help or the user’s manual.Accessing the AXIS 216FD from the InternetOnce installed, your AXIS 216FD is accessible on your local network (LAN). To access thecamera from the Internet, network routers must be configured to allow incoming traffic,which is usually done on a specific port. Please refer to the documentation for your routerfor further instructions.For more information on this and other topics, please visit the Axis Support Web atwww.axis.com/techsupFurther informationThe user’s manual is available from the Axis Web site at www.axis.com or from the AxisNetwork Video Product CD supplied with this product.Tip!Visit www.axis.com/techsup to check if there is updated firmware available for yourAXIS 216FD. To see the currently installed firmware version, see the BasicConfiguration web page in the product’s setup tools.