Axis 5400+ Installation Manual

Also see for 5400+: Specification User guide User guide User manual User manual

Contents

Axis 5400+ Installation Manual Manual pdf 6 page image

Page 6 AXIS 5400+/AXIS 5600+ Installation GuideInstallation in Mac OS XThis section describes how to set up your Axis print server for printing in Mac OS X 10.2 andlater. For installation on an older Mac OS, refer to the userís manual on www.axis.com1. From the Apple menu, selectGo > Applications > Utilitiesand start the Print Center.2. Click Add in the Printer List.3. From the drop-down list, selectRendezvous.4. Highlight the printer you wishto install. The default printserver name is AXISxxxxxxNetwork Print Server_,where xxxxxx represents thelast six digits of the printserverís serial number.5. Select the printer brand andmodel from the drop-down list.If the printerís PPD is alreadyinstalled, the brand and modelare selected automatically.6. To complete the installation,click Add. The printer is nowadded to the Printer List.Notes:ï The print serverís serial number can be found onthe label on the product casing.ï To configure printer settings, click Printers >Configure Printer.ï If the print server using Rendezvous is alreadyinstalled and the print server name or servicename is changed, the print server must beremoved from the Printer List and thenre-installed with the new Rendezvous servicename.ï If you change the service name from Setup >TCP/IP > Rendezvous > Service Name, this namewill then override the Print Server Name settingas set in the admin tools in the productís webinterface.