AXIS 5400+/AXIS 5600+ User’s Guide4Before You StartThis guide applies to the AXIS 5400+/AXIS 5600+ with firmware version 6.43 and higher.The following operating systems are covered in this guide:• Windows 98, Windows Me, Windows NT, Windows 2000, Windows XP, Windows Server2003• Mac OS X• UNIX/LinuxNote:The instructions in this guide are based on the settings found in a new and unconfigured AXIS5400+/AXIS 5600+.To reload the default parameters, you can perform a Factory Default, which will restore mostsettings to their default values. See Using the Test Button on page 26 for instructions.Installation instructions in this book cover the above operating systems over TCP/IP.See the AXIS 5400+/AXIS 5600+ User’s Manual, located on www.axis.com for installation instructionsregarding• Windows over NetBIOS/NetBEUI• NetWare over IPX/SPX and TCP/IP• MacOS over AppletalkE
