Page 24 AXIS 5570e Installation GuideSetup for NetWareThis sections contains basic setup instructions for NetWare. See the AXIS 5570e User’s Manual on www.axis.comfor more detailed instructions.Setup using NDPS, on page 24- Public Access Printers, on page 24- Controlled Access Printers, on page 26Basic Queue-based printing over IP, on page 28Setup using iPrintFor a setup using iPrint, see the AXIS 5570e User’s Manual.Setup using NDPSThe AXIS 5570e supports Novell Distributed Print Services (NDPS). You can run NDPS over Pure IP (TCP/IP) orIPX/SPX.Before the AXIS 5570e can be installed, make sure that NDPS is installed and a Broker is loaded on your NetWarefile server.AXIS 5570e uses the AXIS NDPS Gateway for printing in networks using either IP or IPX as transport protocols.The printer gateways are included with the NDPS software (from version 5.1 and up) and are automatically installedtogether with NDPS.Note:Installing the AXIS 5570e in an NDPS environmentHaving assigned an IP address to the AXIS 5570e as described on page 9, you are now ready to install the AXIS5570e for NDPS printing. You can select to install the connected printers as public or controlled access printers.Note:Public Access PrintersFollow these instructions to create a public access printer using the NDPS Manager object in your NetWareadministrator utility:1. Double-click on the NDPS Manager object you will be using to control the Printer Agents.2. On the Identification page for the NDPS Manager, click the Printer Agent List button. The Printer Agent Listdialog will appear.3. Click New. The Create Printer Agent dialog will appear.4. Type a name of your choice in the Printer Agent Name field.5. Select the Axis Gateway configuration in the Gateway Type window.6. Click OKNDPS requires that you run NetWare 4.11 or higher. Pure IP is only supported by NetWare 5 or higher.If you do not have an NDPS Manager object available, start out with creating one in the NetWare Administrator.