Adding Printers in UNIX/LinuxAXIS 5400+ / AXIS 5600+ Userís Manual 69Print Queues Five types of print queues can be configured in the Mandrakedistribution:ï Local Printerï Printer on remote lpd serverï Network printer (TCP/Socket)ï Printer on SMB/Windows 95/98/NT serverï A printer device URl4. Select the Network printerNetwork printerNetwork printerNetwork printer radio button and click NextNextNextNext.5. Enter the IP address or host name of the print server as well as the port youwant to use. Port numbers available for TCP/IP are:6. Click NextNextNextNext.7. Fill in data to help users identify the printer, i.e. name, description andlocation. Click NextNextNextNext.8. Select printer model and click NextNextNextNext.9. Configure the printer and click NextNextNextNext. The printer is set up. Click FinishFinishFinishFinish andthe printer is accessible.Typical Invocation from a Terminal WindowStill using Mandrake as an example, open a Terminal Window and typethe command printtool. If you are in a terminal window, the graphicversion will start (as described above). If you do not have the X WindowSystem installed, the command will start a text based version. The sameinformation as was described above will be needed.Note: In Mandrake, even if you type printtool at a shell prompt, printerdrake willautomatically start.Port number LPT1 LPT2 COM1AXIS 5400+ 9900AXIS 5600+ 9900 9902 9901Downloaded from www.Manualslib.com manuals search engine
