Axis 5800+ Mobile Quick Installation Manual

Also see for 5800: Specification Quick start User manual

Contents

Axis 5800+ Mobile Quick Installation Manual Manual pdf 5 page image

AXIS 5800+ Mobile Connecting the Hardware 5Connecting the Hardware1. Make sure that the printer is switched off and that the power supply is disconnected fromthe AXIS 5800+ Mobile.2. Locate the serial number, found on the underside label of the AXIS 5800+, and write itdown. Example: Ser. No. 00408C1802FB3. Connect your printer(s) to the print server’s LPT1 or LPT2 port using a printer cable. Makesure theBluetooth antenna is pointing upwards.4. Connect your AXIS 5800+ to your network (Ethernet Connector), using a twisted paircategory 5 cable.5. Switch on your printer(s) and make sure it is ready for use.6. Connect the power supply to the AXIS 5800+. The Network Indicator will start flashingwhen the print server is correctly connected to the network.7. Wait 1 minute and press the test button once. A test page will be printed on theconnected printer, keep it handy during the installation. The test page will show the IPaddress of the print server.AXIS Network Product CDThe AXIS Network Product CD includes AXIS Utilities Software, Product Software, WhitePapers, User Documentation, etc. It is compatible for use within all of the supported Axiscomputing environments.Notes:• All documents presented on the CD are in PDF format.• If Adobe Acrobat Reader 3.0 or higher is not installed on to your system, you can downloadAcrobat Reader from the AXIS Network Product CD or Adobe’s web site athttp://www.adobe.com.Ethernet Connector10 base T & 100 base TXTest ButtonPower Supply ConnectorNetwork IndicatorPower IndicatorBluetooth AntennaLPT1 LPT2