Axis B Series User Manual
                        | |
Contents
| 
USER MANUAL 7_____________________________________________________________________________________________________________________7. Preparation1. Take the scale out of the packageremoving protective foils.2. Take a pan off and remove protectiveelements from below the pan.3. Place the scale on a stable ground notaffected by mechanical vibrations andairflows.4. Level the scale with the rotating rear legsso that the air bubble in the water-level atthe back of the scale is in the middle. Lockthe legs with the nut.5. Put on the pan.6. Remove everything from a pan and plug ascale to the mains with a ground contact.After self-tests and result stabilisation, thescale displays zero indication.7. In scales with external feeder connect feeder plug to a connector on a display post.Plug a feeder to the mains (~230V, ground connector is not necessary).To feed a scale use only socket with a ground connector.Correct Wrong |
Related manuals for Axis B Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine