Axis BLM Series User Manual

Axis BLM Series User Manual Manual pdf 11 page image

OPERATION MANUAL 11__________________________________________________________________________________________________________________10. Start of workLeave the pan empty, plug the feeder to the mains (~230V/50Hz) and plug thefeeder connector to the 12V power socket at the bottom side of the scale.Scale will execute following step:- test of electronic components,- display type of scale and version of program,- zeroing the indication.After displayed an indication on the main (left) display scale is ready to work.11. Pieces counting (PCS)Scale enables to count identical pieces, e.g. turnbuckles or buttonsMeasurement with single pieces putting on pan:A measurement is performed in two phases:- first phase - single piece weight calculation on the basis of defined pieces amount(default is 10 pieces.),- second phase – pieces counting1. Put on pan quantified details sample.2. Turn a counting by press→→→→PCS+ key.3. If the quantified sample consists 10 pieces press ENTER (solid line on thedrawing). If amount of detail is other write correct value by using numerickeys and ENTER (dotted line on the drawing).4. Number of details has been showed on right display with PCS indicator. Asample mass has been showed in centered display with APW indicator.5. Remove ample form pan and put o portion of pieces.6. Result of calculation is read from right display.