Axis Camera Station S10 Series Installation Manual

Also see for S10 Series: Installation guide Installation guide

Contents

AXIS Camera Station S10 Recorder SeriesSafety InstructionsWARNING• The Axis product shall be installed by a trained professional.CAUTION• Be careful of sharp metal edges. Use cut-resistant gloves during installation.NONONOTICETICETICE• The Axis product shall be used in compliance with local laws and regulations.• Store the Axis product in a dry and ventilated environment.• Avoid exposing the Axis product to shocks or heavy pressure.• Avoid exposing the Axis product to vibration.• Use only applicable tools when installing the Axis product. Using excessive force withpower tools could cause damage to the product.• Do not use chemicals, caustic agents, or aerosol cleaners.• Use a clean cloth dampened with pure water for cleaning.• Use only accessories that comply with the technical specification of the product. Thesecan be provided by Axis or a third party.• Use only spare parts provided by or recommended by Axis.• Do not attempt to repair the product yourself. Contact Axis support or your Axis resellerfor service matters.NONONOTICETICETICE• When transporting the Axis product, use the original packaging or equivalent to preventdamage to the product.The Axis product uses a 3.0 V CR2032 lithium battery as the power supply for its internal real-timeclock (RTC). Under normal conditions this battery will last for a minimum of five years.The battery should not be replaced unless required, but if the battery does need replacing, contactAxis support at www.axis.com/techsup for assistance.Lithium coin cell 3.0 V batteries contain 1,2-dimethoxyethane; ethylene glycol dimethyl ether(EGDME), CAS no. 110-71-4.WARNING• Risk of explosion if the battery is incorrectly replaced.• Replace only with an identical battery or a battery which is recommended by Axis.• Dispose of used batteries according to local regulations or the battery manufacturer'sinstructions.6