Axis Camera Station User Manual

Also see for Camera Station: Installation guide Quick installation guide User manual User manual User manual

AXIS Camera Station Client58 AXIS Camera Station User’s ManualAXIS Camera Station ClientThe AXIS Camera Station Client application is used for remote operations onclient workstations, where you can perform the same tasks as from AXISCamera Station (if Administration is enabled).From a client PC you can acquire and save images, detect motion and savealarms and images without having to access the server PC where settings andrecordings are stored.Important!Note:Install AXIS Camera Station client software1. From the client workstation, insert the CD and select Software then AXISCamera Station Client2. Click Open to launch the installation.AXIS Camera Station uses port 11007 to communicate with the client. On theserver (dedicated PC where AXIS Camera Station is installed), make sure thatport 11007 is open and available for the clients in your network and in yourfirewall.• A maximum of 10 AXIS Camera Station Clients can connect to AXISCamera Station simultaneously.• A PIII 500 MHz PC with 128 MB is the minimum hardware requirement forAXIS Camera Station Client.You may be prompted to install .NET Framework 1.1. Simply follow theinstallation Wizard’s instructions and click your way through.