Axis FC-29W Installation Instructions And Owner's Manuals

Contents

Safe Use of EquipmentWARNINGWARNINGTo reduce the risks of an electric shock, do not expose inside of thisunit to rain or moisture.Installation on a rainy day may also cause fog around the capsule.InstallationInstallation shall be done by qualified installer only and shouldconform to all local codes.Ensuring strength of supporting Dome Housing UnitThe unit must be properly and securely mounted to a supportingstructure capable of sustaining the weight of the unit. Recommenduse 3/8” stainless screws x four (4).Prohibit changes or modifications of equipmentYou are cautioned that any changes or modifications not expresslyapproved in these instructions could void your authority to operatethis equipment.Basic Operating Environment ConditionWe provide warranty for the products that are installed under normaloutdoor -20°C ~ +50°C conditions. We are unable to provide warrantyfor the products which are installed indoor and exposed to constanthigh temperature over +50°C and over 90% humidity.Operating temperature and humidity of camera varies from camera tocamera. You are requested to confirm to camera specification withcamera manufacturer and housing specification with us in advance.i.e. -20°C or below, you are requested to use additional heater and+50°C or above you are requested to use two blowers and Sunshield.Fasten wires tightly.Attention:Keep wires away from the Fan / Heater, and do not disturbFan/Heater’s performance