Axis M3005-V User Manual

Also see for M3004-V: Technical specifications User manual Installation guide Installation guide

AXIS M3005-V Network CameraSystem OptionsNetwork ShareNetwork share allows you to add network storage such as a NAS (Network Attached Storage) or any server that uses CIFS (CommonInternet File System) and use them for storage of recordings.To add a network share:1. Go to System Options > Storage.2. Click Network Share.3. Enter the IP address, DNS or Bonjour name to the host server in the Host field.4. Enter the name of the share in the Share field. Sub folders cannot be used.5. If required, select The share requires login and enter the user name and password.6. Click Connect.To clear all recordings and data from the Axis product’s folder on the designated share, click Clear under Storage Tools.To avoid filling the share, it is recommended to remove recordings continuously. Under Recording Settings, select Remove recordingsolder than and select the number of days or weeks.To stop writing to the share and protect recordings from being removed, select Lock under Recording Settings.MaintenanceThe Axis product provides several maintenance functions. These are available under System Options > Maintenance.Click Restart to perform a correct restart if the Axis product is not behaving as expected. This will not affect any of the currentsettings.Click Restore to reset most settings to the factory default values. The following settings are not affected:• the boot protocol (DHCP or static)• the static IP address• the default router• the subnet mask• the system time• the IEEE 802.1X settings• uploaded applications are kept but must be restartedClick Default to reset all settings, including the IP address, to the factory default values. This button should be used with caution. TheAxis product can also be reset to factory default using the control button, see Reset to Factory Default Settings, on page 44.To identify the product or test the Status LED, click Flash LED under Identify and specify the duration in seconds, minutes or hours.This can be useful for identifying the product among other products installed in the same location.For information about firmware upgrade, see Upgrading the Firmware, on page 45.SupportSupport OverviewThe System Options > Support > Support Overview page provides information on troubleshooting and contact information,should you require technical assistance.42