Axis M3005-V User Manual

Also see for M3005-V: Technical specifications User manual Installation guide Installation guide User manual

AXIS M3005-V Network CameraHardware OverviewHardware Overview432151. Dome cover2. Control button3. microSD Card slot4. Network connector (PoE)5. Focus ringConnectorsFor technical specifications, seepage 49.Network connector - RJ-45 Ethernet connector. Supports Power over Ethernet (PoE).NOTICEThe product shall be connected using a shielded network cable (STP). All cables connecting the product to the network switchshall be shielded (STP) and intended for their specific use. Make sure that the network switch is properly grounded. SeeElectromagnetic Compatibility (EMC) for regulatory requirements.SD card slot - A standard or high-capacity microSD card (not included) can be used for local recording with removable storage.NOTICETo prevent corruption of recordings, the SD card should be unmounted before removal. To unmount, go to Setup > SystemOptions > Storage > SD Card and click Unmount.Control button - The control button is used for:• Connecting to an AXIS Video Hosting System service. Seepage 36. To connect, press and hold the button for about1 second until the Status LED flashes green.• Connecting to AXIS Internet Dynamic DNS Service. Seepage 36. To connect, press and hold the button forabout 3 seconds.• Resetting the product to factory default settings. Seepage 43.LED IndicatorsColor IndicationUnlit Connection and normal operationAmber Steady during startup. Flashes during firmware upgrade.4