Axis M3006-V User Manual

Also see for M1045-LW: Installation guide User manual Installation guide User manual Installation guide

AXIS M3006-V Network CameraSystem Options4. The card can now be removed.Format SD CardNONONOTICETICETICEFormatting the SD card will remove all data and recordings stored on the card.The Axis product can be configured to automatically format SD cards that are inserted into the product. If autoformat is enabled andan SD card is inserted, the product will check if the SD card has the ext4 file system. If the card has a different file system, thecard will automatically be formatted to ext4.ImportantIf autoformat is enabled, only use new or empty SD cards. Any data stored on the card will be lost when the card is insertedinto the Axis product.To enable automatic formatting, follow these steps:1. Open the Axis product’s webpages and go to Setup > System Options > Storage.2. Click SD Card.3. Under General Settings, select Autoformat to.4. Click OK to save settings.An SD card inserted into the product can be manually formatted to one of the supported file systems. To manually format theSD card, follow these steps:1. Insert the SD card in the SD card slot.2. Open the Axis product’s webpages and go to Setup > System Options > Storage.3. Click SD Card.4. Click Format and select the desired file system.5. Click OK to start formatting the card.Network ShareNetwork share allows you to add network storage such as a NAS (network-attached storage). The NAS shall be dedicated forrecordings and data from the Axis products connected to the network. For information about reference NAS devices, go towww.axis.com/se/sv/products/axis-camera-companion/support-and-documentationNoteFor NAS recommendations see www.axis.comTo add a network share:1. Go to System Options > Storage.2. Click Network Share.3. Enter the IP address, DNS or Bonjour name to the host server in the Host field.4. Enter the name of the share in the Share field. Sub folders cannot be used.5. If required, select The share requires login and enter the user name and password.6. Click Connect.To clear all recordings and data from the Axis product’s folder on the designated share, click Clear under Storage Tools.51