Axis M3045-V User Manual

Also see for M3045-V: Installation guide User manual User manual Installation guide User manual

AXIS M3045-V Network CameraHow to access the productHow to set the root passwordTo access the Axis product, you must set the password for the default administrator user root. This is done in the Configure RootPassword dialog, which opens when the product is accessed for the first time.To prevent network eavesdropping, the root password can be set via an encrypted HTTPS connection, which requires an HTTPScertificate. HTTPS (Hypertext Transfer Protocol over SSL) is a protocol used to encrypt traffic between web browsers and servers. TheHTTPS certificate ensures encrypted exchange of information. See HTTPS on page 45.The default administrator user name root is permanent and cannot be deleted. If the password for root is lost, the product must bereset to the factory default settings. See How to reset to factory default settings on page 56.To set the password via a standard HTTP connection, enter it directly in the dialog.To set the password via an encrypted HTTPS connection, follow these steps:1. Click Use HTTPS.A temporary certificate (valid for one year) is created, enabling encryption of all traffic to and from the product, and thepassword can now be set securely.2. Enter a password and then re-enter it to confirm the spelling.3. Click OK. The password has now been configured.Set Power Line FrequencyPower line frequency is set the first time the Axis product is accessed and can only be changed from Plain Config (see page 56)or by resetting the product to factory default.Select the power line frequency (50 Hz or 60 Hz) used at the location of the Axis product. Selecting the wrong frequency may causeimage flicker if the product is used in fluorescent light environments.When using 50 Hz, the maximum frame rate is limited to 25 fps.NotePower line frequency varies depending on geographic region. The Americas usually use 60 Hz, whereas most other parts ofthe world use 50 Hz. Local variations could apply. Always check with the local authorities.Configure capture modeNoteThe default capture mode is 1080p @ 30/25 fps. To connect the product to a video source using a standard HDMI® cable,select the HDMI option.See also About capture modes on page 19.About the live view windowThe controls and layout of the live view window may have been customized to meet specific installation requirements and userpreferences. Consequently, some of the examples and functions featured here may differ from those displayed in your own live viewwindow. The following provides an overview of each available control.10