Axis M3116-LVE User Manual

Also see for AXIS M3115-LVE: User manual

AXIS M31 Network Camera SeriesThe device interfaceAllow access through: Select if a user is allowed to connect to the device through the HTTP, HTTPS, or both HTTP and HTTPSprotocols.HTTPS is a protocol that provides encryption for page requests from users and for the pages returned by the web server. Theencrypted exchange of information is governed by the use of an HTTPS certificate, which guarantees the authenticity of the server.To use HTTPS on the device, you must install an HTTPS certificate. Go to System > Security to create and install certificates.NoteIf you view encrypted web pages through HTTPS, you might experience a drop in performance, especially when yourequest a page for the first time.HTTP port: Enter the HTTP port to use. Port 80 or any port in the range 1024-65535 are allowed. If you are logged in as anadministrator, you can also enter any port in the range 1-1023. If you use a port in this range, you get a warning.HTTPS port: Enter the HTTPS port to use. Port 443 or any port in the range 1024-65535 are allowed. If you are logged in as anadministrator, you can also enter any port in the range 1-1023. If you use a port in this range, you get a warning.Certificate: Select a certificate to enable HTTPS for the device.Friendly nameBonjour®: Turn on to allow automatic discovery on the network.Bonjour name: Enter a friendly name to be visible on the network. The default name is the device name and MAC address.Use UPnP®: Turn on to allow automatic discovery on the network.UPnP name: Enter a friendly name to be visible on the network. The default name is the device name and MAC address.One-click cloud connectionOne-click cloud connection (O3C) together with an O3C service provides easy and secure internet access to live and recorded videofrom any location. For more information, see axis.com/end-to-end-solutions/hosted-services.Allow O3C:• One-click: The default setting. Press and hold the control button on the device to connect to an O3C service over theinternet. You need to register the device with the O3C service within 24 hours after you press the control button.Otherwise, the device disconnects from the O3C service. Once you have registered the device, Always is enabled andthe device stays connected to the O3C service.• Always: The device constantly attempts to connect to an O3C service over the internet. Once you have registered thedevice, it stays connected to the O3C service. Use this option if the control button on the device is out of reach.• No: Disables the O3C service.Proxy settings: If needed, enter the proxy settings to connect to the HTTP server.Host: Enter the proxy server’s address.Port: Enter the port number used for access.Login and Password: If needed, enter username and password for the proxy server.Authentication method:• Basic: This method is the most compatible authentication scheme for HTTP. It’s less secure than the Digest methodbecause it sends the username and password unencrypted to the server.• Digest: This method is more secure because it always transfers the password encrypted across the network.• Auto: This option lets the device select the authentication method depending on the supported methods. It prioritizesthe Digest method over the Basic method.Owner authentication key (OAK): Click Get key to fetch the owner authentication key. This is only possible if the device isconnected to the internet without a firewall or proxy.33