Axis M7010 User Manual

Also see for M7010: Installation guide User manual

AXIS M7010 Video EncoderEvents2. Enter a Name and select Email from the Type list.3. Enter the email addresses to send emails to in the To field. Use commas to separate multiple addresses.4. Select the email provider from the Provider list.5. Enter the user ID and password for the email account.6. Click Test to send a test email.To set up an email recipient using for example a corporate email server, follow the instructions above but select User defined asProvider. Enter the email address to appear as sender in the From field. Select Advanced settings and specify the SMTP serveraddress, port and authentication method. Optionally, select Use encryption to send emails over an encrypted connection. The servercertificate can be validated using the certificates available in the Axis product. For information on how to upload certificates,see Certificates, on page 35.SchedulesSchedules can be used as action rule triggers or as additional conditions, for example to record video if motion is detected outsideoffice hours. Use one of the predefined schedules or create a new schedule as described below.To create a new schedule:1. Go to Events > Schedules and click Add.2. Enter a descriptive name and the information needed for a daily, weekly, monthly or yearly schedule.3. Click OK.To use the schedule in an Action Rule, select the schedule from the Schedule drop-down list in the Action Rule Setup page.RecurrencesRecurrences are used to trigger Action Rules repeatedly, for example every 5 minutes or every hour.To set up a recurrence:1. Go to Events > Recurrences and click Add.2. Enter a descriptive name and recurrence pattern.3. Click OK.To use the recurrence in an Action Rule, first select Time from the Trigger drop-down list in the Action Rule Setup page andthen select the recurrence from the second drop-down list.To modify or remove recurrences, select the recurrence in the Recurrences List and click Modify or Remove.31