Axis M7014 Installation Manual

Also see for M7010: User manual User manual

Contents

AXIS M7014/M7010 Installation Guide Page 5ENGLISHAXIS M7014/M7010 Video EncoderInstallation GuideThis installation guide provides instructions for installing the AXIS M7014/M7010 video encoder onyour network. For all other aspects of using the product, please see the product’s User’s Manual,available on the CD included in this package, or from www.axis.comInstallation stepsFollow these steps to install the AXIS M7014/M7010 on your local network (LAN):1. Check the package contents against the list below.2. Hardware overview. See page 6.3. Install the hardware. See page 7.4. Assign an IP address. See page 9.5. Set the password. See page 12.Package contentsItem Models/variants/notesAxis video encoder models AXIS M7014AXIS M7010Power adapter models AXIS M7014: Type PS-KAXIS M7010: Type PS-PMounting kit AXIS M7014• 4 screws and 4 plugs to mount the encoder to a concrete wallAXIS M7010• 8 screws (for mounting with brackets)• 2 mounting brackets• 4 M6x20 screws for mounting in rackAXIS M7014/M7010• 4 Surface protection pads• Terminal block connectors (RS-485/RS-422: 2 x 2-pin connectorfor AXIS M7014; 8 x 2 pin connector for AXIS M7010, Power: 2-pin connector)CD AXIS Network Video Product CD, including product documentation,installation tools and other softwarePrinted Materials AXIS M7014/M7010 Installation Guide (this document)Axis Warranty DocumentImportant!This product must be used incompliance with local laws andregulations.