ENGLISH21Print Server Management Using the ResetButtonThe reset button can be used for several operations:Print a test page:1. Verify that the DIP switch is on “Nor.”2. Hold down the reset button for 5 seconds. The test page will beprinted on the connected printer.Reset:1. Verify that the DIP switch is on “Nor.”2. Press the reset button once.Perform a Factory Default:1. Verify that the DIP switch is on “Nor.”2. Disconnect the external power supply.3. Hold down the reset button and reconnect the external powersupply.4. Wait until the orange and green LED indicators have blinkedtwice simultaneously.5. Release the reset button.6. The print server will restart.The test page displays information about e.g. the print server’s IPaddress, MAC address, subnet mask, default gateway.WARNING! This will restart the print server and stop all on-going andpending print jobs!
