Axis P1353-E Installation Manual

Also see for AXIS P1353-E: User manual User manual Installation guide

Contents

AXIS P1353-E/P1354-E Installation Guide Page 11ENGLISHConnect the cables1. Optionally insert an SD memory card (not included) into the SDHC (Secure Digital HighCapacity) card slot. A standard or high capacity SD card is required to store images locally inthe camera.2. Optionally connect external input/output devices. See page 15 for information on the terminalconnector pins. Prepare the cables with cable glands, see Route the network cable through thecable hole, on page 9, and route the cables through the cable holes into the bottom cover andto the camera.3. Connect the camera to the network using a shielded network cable. Connect the network cableto the network connector on the bottom. The network cable and the I/O cable between thebottom cover and the camera are already connected at delivery4. Check that the indicator LEDs indicate the correct conditions. See the table on page 18 forfurther details. Note that the Status LED can be configured to be unlit during normal operation.* For network and power connection with at least PoE 802.3af Class 3, 15,4W at the PoEmidspan/switchCold Startup Delay SwitchThe housing used in this Axis product features Arctic Temperature Control, which is enabled bysetting the Cold Startup Delay switch to I (ON). When enabled, this function controls when thecamera restarts after a power cut, when temperatures are below 0 °C (32 °F); the camera is firstheated to approximately 0 °C (32 °F) before it initializes. This prevents damage to camera modelsthat include moving parts.Network connectorPoE IN *Network connectorPoE outBottom coverCable holesCold Startup DelayAlarm outputSwitch (see below)