Axis P1355-E Installation Manual

Also see for AXIS P1357-E: User manual User manual User manual Installation guide Installation guide

Contents

AXIS P1355-E/P1357-E Installation Guide Page 13ENGLISH• The iris should always be opened to its maximum while focusing, which gives the smallest depth offield and thus the best conditions for correct focusing.Focus AssistantTo focus using the Focus Assistant, follow the instructions in steps 1 - 3 on page 12 before you startwith the steps below.1. Mount or place the camera so that it cannot be moved.2. Loosen the zoom puller by turning it anti-clockwise. Move the puller to set the zoom level.Retighten the zoom puller.3. Set the camera to its extreme distant-focus position by loosening the focus puller and turningthe focus ring fully clockwise.4. Press and quickly release the Control button. When the Status LED flashes green, the FocusAssistant is enabled.If the Status LED flashes either red or amber before you are able to adjust the lens, skip to step7 to exit the Focus Assistant and repeat steps 3 - 7. See the notes below.5. Gently turn the focus ring anti-clockwise until it stops.6. Finally, turn the focus ring slowly clockwise until the status indicator flashes green or amber(not red).7. To exit the Focus Assistant, press the Control button again.Note: The Focus Assistant is switched off automatically after 15 minutes.8. Retighten the focus puller.9. Open the Live View page in the web browser and check the quality of the image.10. Continue with steps 6 - 8 on page 12.Control buttonZoom pullerFocus puller