Axis P1368-E Installation Manual

Also see for P1368-E: User manual User manual Installation guide

AXIS P1368-E Network CameraButtonsControl button ENThe control button is used for:• Resetting the product to factory default settings. See How to reset to factory defaultsettings on page 22.• Connecting to an AXIS Video Hosting System service or AXIS Internet Dynamic DNSService. For more information about these services, see the User Manual.ConnectorsNetwork connectorRJ45 Ethernet connector with Power over Ethernet (PoE).Audio connectorThe Axis product has the following audio connectors:• Audio in – 3.5 mm input for a mono microphone, or a line-in mono signal (left channelis used from a stereo signal).• Audio out – 3.5 mm output for audio (line level) that can be connected to a publicaddress (PA) system or an active speaker with a built-in amplifier. A stereo connectormust be used for audio out.3.5 mm audioconnectors (stereo)1 Tip 2 Ring 3 SleeveAudio Input Microphone/Line in GroundAudio Output Line out (mono) GroundAbout I/O connectorsUse the I/O connector with external devices in combination with, for example, tampering alarms,motion detection, event triggering, and alarm notifications. In addition to the 0 V DC referencepoint and power (DC output), the I/O connector provides the interface to:25Available from A1 Security Cameraswww.a1securitycameras.com email: sales@a1securitycameras.com