Axis P5522–E PTZ User Manual

Also see for DROP CEILING P5522-E: Installation guide Installation guide Datasheet User manual Preventive Maintenance Instructions and Checklist

AXIS P5522–E PTZ Dome Network CameraPTZ (Pan Tilt Zoom)See the online help for more information.ControlsPanel Shortcut Command Buttons can be configured to provide direct access to commands issued via the VAPIX® ApplicationProgramming Interface. The buttons will be displayed in the PTZ control panel, which is available in the Live View page thoughthe Ctrl panel button, see page 8 .Deselect the options under Enable/Disable controls to disable the pan, tilt, zoom, focus and iris controls.NoteDisabling PTZ controls will not affect preset positions. For example, if the tilt control is disabled, the product can still move topreset positions that require a tilt movement.Control QueueThe administrator can set up a queue for PTZ controllers from PTZ > Control Queue. Once set up, the PTZ Control Queue buttonsappear in the Live View page offering one viewer exclusive control for a limited period of time. Other users will be placed in queue.A user who belongs to a group (see Users, on page 32) with a higher PTZ priority can go before other users in the queue andtake control of the product. The order of priority is as follows:1. Administrator — An administrator takes over PTZ control regardless of who is first in queue. The administrator will beremoved from the queue 60 seconds after the last PTZ control command.2. Event — The Axis product can be configured to go to a preset position when triggered by an alarm (see Events, on page 24).The event will immediately be placed first in the queue except when an administrator is in control.3. Operator — Same as administrator but with lower priority4. Guard Tour — A guard tour (see page 20) has PTZ control for an indefinite period of time. It may be overridden by anoperator, event or administrator. The guard tour will resume when higher priority groups leave the queue.5. Viewer — Multiple viewers must wait for their turn. The viewer has 60 seconds PTZ control before control is passedon to the next viewer in queue.Note• The administrator can enable and disable PTZ controls for selected users.• To identify different users in the viewer group, cookies must be enabled on the client.22