Axis P5532–E User Manual

Also see for P5532-E: Preventive Maintenance Instructions and Checklist User manual Installation guide Installation guide User manual

About this documentThis manual is intended for administrators and users of the AXISP5532-E Network Camera, and is applicable to firmware 5.40 andlater. It includes instructions for using and managing the product onyour network. Previous experience of networking will be of use whenusing this product. Some knowledge of UNIX or Linux-based systemsmay also be beneficial, for developing shell scripts and applications.Later versions of this document will be posted to the Axis website,as required. See also the product’s online help, available via theweb-based interface.Legal ConsiderationsVideo surveillance can be regulated by laws that vary from country tocountry. Check the laws in your local region before using this productfor surveillance purposes.This product includes one (1) H.264 decoder license. To purchasefurther licenses, contact your reseller.LiabilityEvery care has been taken in the preparation of this document. Pleaseinform your local Axis office of any inaccuracies or omissions. AxisCommunications AB cannot be held responsible for any technical ortypographical errors and reserves the right to make changes to theproduct and manuals without prior notice. Axis Communications ABmakes no warranty of any kind with regard to the material containedwithin this document, including, but not limited to, the impliedwarranties of merchantability and fitness for a particular purpose. AxisCommunications AB shall not be liable nor responsible for incidental orconsequential damages in connection with the furnishing, performanceor use of this material. This product is only to be used for its intendedpurpose.Intellectual Property RightsAxis AB has intellectual property rights relating to technology embodiedin the product described in this document. In particular, and withoutlimitation, these intellectual property rights may include one or moreof the patents listed at www.axis.com/patent.htm and one or moreadditional patents or pending patent applications in the US and othercountries.This product contains licensed third-party software. See the menu item“About” in the product’s user interface for more information.This product contains source code copyright Apple Computer,Inc., under the terms of Apple Public Source License 2.0 (seewww.opensource.apple.com/apsl). The source code is available fromhttps://developer.apple.com/bonjour/Equipment ModificationsThis equipment must be installed and used in strict accordance with theinstructions given in the user documentation. This equipment containsno user-serviceable components. Unauthorized equipment changes ormodifications will invalidate all applicable regulatory certificationsand approvals.Trademark AcknowledgmentsAXIS COMMUNICATIONS, AXIS, ETRAX, ARTPEC and VAPIX areregistered trademarks or trademark applications of Axis AB in variousjurisdictions. All other company names and products are trademarks orregistered trademarks of their respective companies.Apple, Boa, Apache, Bonjour, Ethernet, Internet Explorer, Linux,Microsoft, Mozilla, Real, SMPTE, QuickTime, UNIX, Windows, WindowsVista and WWW are registered trademarks of the respective holders.Java and all Java-based trademarks and logos are trademarks orregistered trademarks of Oracle and/or its affiliates. UPnPTM is acertification mark of the UPnPTM Implementers Corporation.SD, SDHC and SDXC are trademarks or registered trademarks of SD-3C,LLC in the United States, other countries or both. Also, miniSD, microSD,miniSDHC, microSDHC, microSDXC are all trademarks or registeredtrademarks of SD-3C, LLC in the United States, other countries or both.Regulatory InformationEuropeThis product complies with the applicable CE marking directivesand harmonized standards:• Electromagnetic Compatibility (EMC) Directive 2004/108/EC. SeeElectromagnetic Compatibility (EMC) on page 2 .• Low Voltage (LVD) Directive 2006/95/EC. See Safety on page 3 .• Restrictions of Hazardous Substances (RoHS) Directive 2011/65/EU.See Disposal and Recycling on page 3 .A copy of the original declaration of conformity may be obtained fromAxis Communications AB. See Contact Information on page 3 .Electromagnetic Compatibility (EMC)This equipment has been designed and tested to fulfill applicablestandards for:• Radio frequency emission when installed according to theinstructions and used in its intended environment.• Immunity to electrical and electromagnetic phenomena wheninstalled according to the instructions and used in its intendedenvironment.USAThis equipment has been tested using a shielded network cable (STP)and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designedto provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordancewith the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interferencewill not occur in a particular installation. If this equipment doescause harmful interference to radio or television reception, whichcan be determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one or more of thefollowing measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different fromthat to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.The product shall be connected using a shielded network cable (STP)that is properly grounded.CanadaThis digital apparatus complies with CAN ICES-3 (Class B). The productshall be connected using a shielded network cable (STP) that is properlygrounded.Cet appareil numérique est conforme à la norme CAN NMB-3 (classe B).Le produit doit être connecté à l'aide d'un câble réseau blindé (STP) quiest correctement mis à la terre.EuropeThis digital equipment fulfills the requirements for RF emissionaccording to the Class B limit of EN 55022. The product shall beconnected using a shielded network cable (STP) that is properlygrounded.This product fulfills the requirements for immunity accordingto EN 61000-6-1 residential, commercial and light-industrialenvironments.This product fulfills the requirements for immunity according toEN 61000-6-2 industrial environments.This product fulfills the requirements for immunity according toEN 55024 office and commercial environmentsAustralia/New ZealandThis digital equipment fulfills the requirements for RF emissionaccording to the Class B limit of AS/NZS CISPR 22. The product shallbe connected using a shielded network cable (STP) that is properlygrounded.Japanこの装置は、クラスB 情報技術装置です。この装置は、家庭環境で使用することを目的としていますが、この装置がラジオやテレビジョン受信機に近接して使用されると、受信障害を引き起こすことがあります。取扱説明書に従って正しい取り扱いをして下さい。本製品は、シールドネットワークケーブル(STP)を使用して接続してください。また適切に接地してください。Korea이 기기는 가정용(B급) 전자파적합기기로서 주로 가정에서 사용하는 것을 목적으로 하며, 모든 지역에서 사용할 수있습니다. 적절히 접지된 STP (shielded twisted pair) 케이블을 사용하여 제품을 연결 하십시오.