Axis P7216 Installation Manual

Also see for P7216: User manual Installation guide Installation guide Installation guide

Contents

AXIS P7216 Video EncoderConnect the cables1. Connect the video encoder to the network using a network cable RJ45 and/or a SFP cable.2. Optionally connect the external input/output devices.3. Optionally connect active speakers and/or external microphones.4. Connect the cameras to the video inputs.5. Connect the supplied indoor power adapter.6. Check that the indicator LEDs indicate the correct conditions. See LED Indicators, onpage 8Auxiliary ConnectorThe AXIS P7216 is equipped with an additional RJ45 network connector. The purpose with thisconnector is to simplify maintenance work on the AXIS P7216 that requires connection to acomputer.NoteThe auxiliary connector should only be connected during maintenance work.Access the ProductUse the tools provided on the Installation and Management Software CD to assign an IP address,set the password and access the video stream. This information is also available from the supportpages on www.axis.com/techsup/Reset to Factory Default SettingsImportantReset to factory default should be used with caution. A reset to factory default will resetall settings, including the IP address, to the factory default values.To reset the product to the factory default settings:NoteTo reset a single channel to the original factory default settings, use the button provided inthat unit’s web interface.It is also possible to reset parameters to factory default via the web interface. Go to Setup> System Options > Maintenance.14

/ 16

Related manuals for Axis P7216