Axis P7216 Installation Manual

Also see for P7216: Installation guide User manual Installation guide Installation guide

Contents

AXIS P7216 Video EncoderInstall the HardwareMount the video encoderThe AXIS P7216 is supplied with a mounting kit containing brackets. The unit can be mounted ina rack or on a wall.After removing the existing 4 screws, attach the mounting brackets to the video encoder at anangle suitable for installation in a standard 1U 19” rack, or on the wall.Mounting on a wall1. Position the video encoder against the wall with the brackets attached, and mark thefour mounting holes for each bracket.2. Drill the four mounting holes.3. Attach the video encoder to the wall using appropriate screws.Connect the cables1. Connect the video encoder to the network using a network cable RJ45 (NET) and/or aSFP module and optic fibre or copper networking cable.2. Optionally connect the external input/output devices.3. Optionally connect active speakers and/or external microphones.4. Connect the cameras to the video inputs.5. Connect the supplied indoor power adapter.6. Check that the indicator LEDs indicate the correct conditions. See LED Indicators onpage 8NONONOTICETICETICEMake sure the unit is properly grounded by using the grounding screw.If the unit will be used with cameras or accessories located outdoors then its ground screwshould be connected to a local grounding point.NoteIn order to use the built-in network redundancy functionality, both the RJ45 (NET) and theSFP module must be connected. See Network Redundancy on page 15Auxiliary ConnectorThe video encoder is equipped with an additional RJ45 network connector. The purpose withthis connector is to simplify maintenance work on the video encoder that requires connectionto a computer.14