Axis P7216 User Manual

Also see for P7216: Installation guide Installation guide Installation guide Installation guide

AXIS P7216 Video EncoderSystem OptionsNoteThe installation and management software tools are available from the support pages on www.axis.com/techsupFor products with multiple IP addresses channel 1 will have the address 192.168.0.90, channel 2 will have the address192.168.0.91 and so on.To reset the product to the factory default settings:1. Disconnect power from the product.2. Press and hold the control button and reconnect power. See Hardware Overview on page 6 .3. Keep the control button pressed for 15–30 seconds until the status LED indicator flashes amber.4. Release the control button. The process is complete when the status LED indicator turns green. The product has been resetto the factory default settings. If no DHCP server is available on the network, the default IP address is 192.168.0.905. Using the installation and management software tools, assign an IP address, set the password, and access the video stream.NoteTo reset a single channel to the original factory default settings, use the button provided in that product’s webpage.It is also possible to reset parameters to factory default via the web interface. Go to Setup > System Options > Maintenance andclick Default.51