Axis P8513 Installation Manual

Also see for P8513: User manual User manual

Contents

Page 14 AXIS P85 Network Camera SeriesResetting to the Factory Default SettingsThis will reset all parameters, including the IP address, to the FactoryDefault settings:1. Disconnect the network cable.2. Remove the rubber cap from the control button hole.3. Using an appropriate object such as a small screw driver, press andhold the Control button and reconnect the network cable.4. Keep the Control button pressed for at least 15 seconds.5. Release the Control button.6. Wait for at least 1 minute for the process to complete.7. The camera has now been reset.8. Re-assign the IP address, using one of the methods described in thisdocument.It is also possible to reset parameters to the original factory defaultsettings via the web interface. For more information, please see theonline help or the user’s manual.Further informationThe user’s manual is available from the Axis Web site at www.axis.com.Tip!Visit www.axis.com/techsup to check if there is updated firmwareavailable for your network camera. To see the currently installedfirmware version, click the Basic Configuration menu item in theproduct’s web page.