Axis PrintPoint 140 BJC Quick Installation Manual

Also see for 140 BJC: User manual

Contents

Axis PrintPoint 140 BJC Quick Installation Manual Manual pdf 6 page image

6. Select a printer driver from the list of Installed Printers, or clickAdd>> to install a new driver. Click Connect...7. Select the Windows port name defined in step 4 above thatshould now feature at the bottom of the Ports list.8. Click OK to close the Connect dialog, and Close to close Printers.The setup is now completed and you can print through your AXISPrintPoint 140 BJC.Important: Windows 3.1 will require network support such as LANServer or LAN Manager Workstation software to be installed inorder to redirect a local printer port to a network device.Important: AXIS Print Utility for Windows must be running whenyou print through your AXIS PrintPoint 140 BJC. We stronglyrecommend that you copy the AXIS Print Utility icon into yourStartUp folder.Windows Clients using LANtasticFrom any Windows client, the AXIS PrintPoint 140 BJC may alsobe used for network printing within LANtastic environments. Yourchoice of Axis utility software should be guided by type of Windowsclient employed. Simply refer to the appropriate Windows Sectionfor your client above. Please ensure that your LANtastic client isrunning NetBIOS/NetBEUI.OS/2Firstly, ensure that the NetBEUI protocol is active. If necessary, useMPTS/LAPS (LAN Server) to activate it.Load AXIS Print Utility for OS/2 and Install your AXIS PrintPoint140 BJC:1. Insert the OS/2 Utilities diskette into your disk drive, and openan OS/2 window. Execute the install.exe program.2. With the AXIS Print Utility for OS/2 running, install your AXISPrintPoint 140 BJC by clicking Install. The port appear as.LP1, where is AX followed by last six digits ofthe AXIS PrintPoint 140 BJC serial number. For example:AX100086.LP1. Note that this alphanumeric name will besuperseded by any new name given to your AXIS PrintPoint 140BJC when using AXIS NetPilot™.3. Select the port you want to install, then click Install.Repeat this procedure for each server using the AXIS PrintPoint 140BJC.Create a Print Queue (OS/2 version 1.x):1. Double-click the Print Manager icon, click Setup, then selectPrinters...2. Click Add to make a new printer definition, then type a name ofyour choice in the Name field.

/ 8

Related manuals for Axis 140 BJC