Axis Q1910 User Manual

Also see for Q1910: Installation guide Installation guide Installation guide Installation guide

29AXIS Q19 Series - PTZ (Pan Tilt Zoom)Guard TourA guard tour displays the video stream from different preset positions, one-by-one, in a pre-determined order or randomly,and for configurable time periods. The guard tour will keep running after the user has logged off or closed the browser. Once apreset position has been set and added to the guard tour, the following settings can be made:• Pause between runs• Move Speed - sets the speed of the Pan/Tilt movements to the preset position• View Time in seconds or minutes• View Order (or Random)You can add, modify and remove guard tours from the Guard Tour web page. For more information, see the online help .AdvancedDeviceAvailable settings depend on the connected PT unit and uploaded driver, please refer to the online help files and to thedocumentation provided with the PT unit and driver.ControlsPanel Shortcut Command Buttons - Here are the controls for creating and saving shortcut commandbuttons. These buttons can provide direct access to various built-in auxiliary commands provided by thePT driver. The buttons are displayed in the Control Panel, which is available on the Live View page byclicking the Ctrl panel button.Enable/Disable controls - Enable or disable the PTZ by checking/unchecking these boxes. When disabled, the Pan and Tiltsliders will not be available on the Live View page or any other page with the video stream included.Driver SelectionA PTZ driver is required to run a connected Pan Tilt Zoom device, see Installing a Pan/Tilt device, on page 28.To delete a driver that has been uploaded, select it from the Uploaded drivers drop-down list and click Remove.Device ID - This is the address of the connected device. To find the Device ID consult the video source's documentation.Device Type - Choose the Device type from the drop-down list. To find which Device type to use, consult the documentationsupplied by the PTZ driver.Control QueueThe PTZ Control Queue is a system for placing PTZ control requests in a queue. The control queue fields on the Live View pageshow the user's current status and position in the queue and the amount of time remaining until PTZ control is given, or if theuser already has control - the amount of control time remaining.